A two component, general epoxy coating which can be successfully applied to damp areas to prevent mould growth. Ideal for use in cellars, tunnels, basements, underpasses and other subterranean areas where a clean, decorative and hygenic finish is required.
Can be applied to concrete, natural stone, floor screed, render, brickwork, blockwork, plaster, asbestos cement and asphaltic substrate.
Use on any area above or below ground.
40m² per 5 Litres per coat. Coverage will vary considerably depending on the porosity and texture of the substrate and thicknes srequired.
Apply with brush or roller. Two coats are usually sufficient. However, a single coat may be adequate on certain surfaces.
Three products in One
- Stops Damp
- Stops Mould Growth
- Decorative Finish
Approved under C.O.P.R 1986 (as amended) by the HSE No. 6587
|Delivery Lead Time||3-5 Days|
|Downloadable Installation Instructions||No|