Your Favourite On-Line Garden Store

  • RapidSSL Secured Site

Regal Home Garden Offices - Specifications

Regal Garden Offices by Benfield ATT

The Regal Professional Garden office range offers a range of purpose designed, practical and cost effective home offices for the garden. Incorporating Benfield ATT's (our parent company) award winning modern construction techniques, Regal Garden Offices have been designed to create beautiful garden buildings with a fully equipped professional work space.

Base Kit:

Foundations:

  • 47 x 47 timber ledgers fixed to inside of 220 x 47 perimeter ring beam to take floor cassettes, with 220 x 47 x 400mm long stub posts to be cut to height to suit site levels.
  • 600 x 600 x 50mm concrete slabs and lead shim for base of each stub post.

Floor:

  • Floor cassettes made up of 150mm joist frame with joists at 400mm centres, 9mm lower external (base) sheathing, 140mm mineral wool insulation.
  • Loose 22mm OSB floor (sub) deck pre-cut to size for fixing after floor cassettes side fixed to ring beam and each other.

Walls:

  • External wall panels made up of 89mm treated timber frame with studs at 600mm centres, 9mm OSB external sheathing, breather membrane, 25 x 50mm external vertical battens, 70mm factory fitted Celotex insulation (leaving 20mm open zone internally for running wiring, telephone, computer and other services).
  • 25 x 50 loose external binder for head of panels across tops of battens to effect straight panel runs.
  • Internal wall frames, where appropriate, made of 38 x 89mm treated timber open frame work with central row of noggins and one triangular corner brace per frame.

Doors & Windows:

  • White uPVC pre double glazed door, plus door and window frames factory fitted in panels.

Roof:

  • Roof panels made up of 89mm treated timber frame with studs at 600mm centres, 18mm OSB external sheathing, 70mm factory fitted Celotex insulation (leaving 20mm open zone internally for running wiring, telephone, computer and other services).
  • 150 x 25 prepared fascia primed both sides.
  • Single ply EPDM membrane supplied as one sheet with cans of adhesive to cover entire roof area and turn down 50mm on fascias

Fixings:

  • 60mm and 90mm Olympic style hexagonal head turbo screws for connecting elements and 50mm screws for fascia.

 

Cladding Kit:

  • Cedar horizontal shiplap boarding 30 x 150mm in running lengths for site fixing to exterior of walls complete with 47 x 47mm corners and framing.
    Note: Cedar may be treated by you or left untreated to grey-out naturally as preferred.
  • 75mm and 50mm hot dipped galvanised screws for fixing back to wall battens.

 

Internal Kit:

  • 1000 gauge polythene vapour membrane for lining walls and ceilings before fitting wall coverings. 15mm staples and hand staple tacker.
  • White surface finish Sasmox or Fermacel 1200 x 2400 x 9mm sheets for walls and ceilings, pre-cut for door and window openings (not for plug, light and other fittings, since these will be located by onsite electrician at your direction)
  • 25mm board screws
  • Planed softwood linings for interior of door and window frames
  • Panel pins for fixing softwood linings.

 

Decking Kit:

  • 150 x 47 perimeter ring beam to take decking with 150 x 47 x 350mm long stub posts to be cut to height to suit site levels.
  • 600 x 600 x 50mm concrete slabs and lead shim for base of each stub post.
  • 150 x 47 triangular frames pre-made for attachment to ring beam to create ramp access for wheelchairs, loading trolleys, etc
  • 20 x 145mm treated decking cut to 1 metre lengths to fix directly to ring beam and ramp.
  • Hot dip galvanised screws for fixing decking
  • 90mm Olympic style hexagonal turbo screws for fixing posts and ring beam.

 

Terrace Kit:

  • Plain rectangular cant top treated timber balusters, 100 x 100mm square (newel) treated timber posts pre-cut for let-in handrail.
  • 37 x 100mm treated timber top handrail (finish height 1200mm above decking surface.
  • 150mm Olympic style hexagonal head screws for fixing (newel) posts.
  • 60mm hot dip galvanised screws for fixing balusters and handrail.

 

Additional Extras:

  • a) Electric wiring harness comprising 1 x 2 gang switched electric wall plug point set at 1200mm above floor for every 2400mm of wall width, 1 x wall mounted electric light point for every 3600mm wall width on walls of minimum 3600, with wiring connecting back to fused distribution box.
    Note: to comply with regulations a qualified electrician will be required to check the wiring once installed and to connect this to the mains / connection from main building etc.

  • b) 1 no Cat 5E computer wiring cable and connection point for every 3600mm of wall width all connected back to a central connection point.

  • c) Under Floor (under carpet / under floor finish) electric heating

  • d) Carpet Tiles for laying directly above floor sub deck or over electric heating

  • e) Kitchenette unit and electric water heater, with push fit pre-assembled plumbing pipe-work and taps, to be connected to drains by others.
    Note: only available for models with kitchenette area.

  • f) Low flush WC with push fit pre-assembled plumbing pipe work and soil pipe connection to push through floor to be connected to drains by others.
    Note: only available for models with WC area(s)

  • g) Rainwater gutters and down pipes.

 

The Regal Home Office range is as flexible as you are. You only need to order the parts of the kit you need. Plus thanks to our unique modular design your Regal Home Office will grow with your business