Hunter Ladder with built in Stabilisers and Levellers 5.20m

Hunter Ladder with built in Stabilisers and Levellers

The entire range of HUNTER ladders is the only range of ladders which are manufactured to the high specification demanded by the British Standard BS EN131 and are fully compliant with the Health and Safety Executive's demanding HSE OC200/30 stability standards.

LEVELLER

Every Hunter Ladder is fitted with an integral leveller.  This will enable the ladder to be set up on a slope of 16º - the steepest slope permitted by the HSE.  

Adjustment is achieved very quickly by positioning the ladder, removing one of the locking pins, allowing the ladder to level itself, replacing the pin in the nearest visible hole (which is never more than 1.5mm away) and turning the pin to lock it.

BASE SLIP

The adjustable leveller sections have moulded feet which are made of specially formulated rubber designed to provide a very high level of grip on any substrate giving a level of resistance to base slip which complies with HSE requirements.

RESISTANCE TO SIDE SLIP AND FLIP

Every Hunter Ladder has on each side a one metre long stabilising bar which is clamped on below the bottom rung and hinges down to the ground.  These arms provide excellent lateral stability and complete resistance to 'flip'.

TOP SLIDE SLIP

At the top of every Hunter Ladder is a pair of wheels which are clamped to the ladders stiles.  The rubber used in the 'tyres' is of a special formulation which provides excellent grip on any substrate and gives excellent resistance to Top Side Slip.  These wheels are also invaluable when running a ladder up a wall.

DIMENSIONS

Number of Sections: 2

Closed Height: 3.00m

Extended Height: 5.20m

Number of rungs: 10